Forest Fires Application Banner copy

Fire detection systems that are automated will only lessen the damages brought by raging wildfires if they were configured properly and operated with good strategies. The fire suppression and monitoring will be effective due only to the complexities it carries other than just constantly monitoring it on a video and then dialing the emergency hotline when the person monitoring sees a smoke. While it is true that little knowledge and expertise in knowing how to detect fire with human eyes can help verify and confirm the presence of fire in the forests, many experts’ opinions are still important in communication this critical information to the teams who will be responding and doing the first critical response to the entire situation. The technology behind automatic fire detection will arm companies with the great potential of cutting costs, saving lives and most of the resources, but there are many steps they can take in ensuring that the end users get the most advantage in using the equipment installed.

Fire suppression to become highly effective needs a combination of efforts of an automated technology for detecting fires, rescuing people as well as knowledgeable system managers. Fire detection systems such as video based fire detection system like PowerCCTV – Verifire relieves the people looking out and in the end lessens the burden on allocation of bringing in human resources in an efficient manner. This equipment assist the management of fires by swiftly identifying the fire – instant verification and confirmation and provides quick judgment of the best action to take. This kind of technology is actually the major step to harness the nature, and how the operators and managers quickly react also determines how efficient the entire plan of suppressing fire is.

How Video Based Fire Detection Systems Work

The company or organization installing the automated forest fire video based detection system usually sets it up at an approximate of fifty to sixty degree of viewing field set to every sensor for easy detection. The area being monitored should be smaller so that every sensor can detect wildfires quicker. This is factual because the typical automated system requires a ten by ten pixel square of puffing smoke for triggering the alerts. The land area covered by the changing pixels’ distance depends on just how the zooming out view is.

Video based camera wildfire detecting systems usually has another processing server that should be included in the system, that processing server is the actual equipment that confirms and verifies the existence of smoke or fire in the designated area. If it does not detect things or items that can resemble characteristics unique to the fire or smoke which is a knowledge base stored on the system, it will continue to move on to the next stream of video and capture more images in the area. The camera will then continue to survey the monitored area and senses things that may resemble smoke or fire which if present will alert the monitoring personnel.

The camera will then finish evaluating the entire area and processing the studies based on the programming function such as the DSP chip present inside the Verifire. Any movement that is smoke like or fire like will be sensed and confirmed. The light indicators on the screen of the computers will change the colors to red within the square alerted and set off an audible sound for alarm. The audible alarm will actually alert any operator who can be in the room or when he leaves the room. The operator or personnel monitoring can come back to the main center and confirm the fire. After confirming the fire, the operator needs to get all the information needed to determine the right decision such as alerting his managers and the emergency responders. A sound emergency plan complements fire monitoring and suppression systems.