How to Replace or Remove an SD Card from a Verifire Box Camera

1- Check all the screws on the white metal cover of the verifire camera.

2- Remove all the screws from the white metal cover as seen on the image below

How to Replace or Remove an SD Card 1

3- In case you have an Auto Iris cable attached to metal case detach it first to remove the upper cover completely.

How to Replace or Remove an SD Card 2

4- Slowly remove the top cover until you can already see the internal parts of the Verifire Camera. Once the top cover has been removed you can see the circuit boards and cables of the camera as seen on the image below.

How to Replace or Remove an SD Card 3

5- Locate the SD card slot on the side where you can see an array of circuit board supported metal holders. See image below to see the exact location.

How to Replace or Remove an SD Card 4

6- Once you found the Micro SD Card slot you place the Micro SD card on the slot by sliding it through and pressing it slowly until it locks on the card slot.

7- After doing these procedure you can now check if the SD card is being read by the camera.

8- Logon the camera and go the Systems = SD Card Storage and check if the sd card has been detected.

How to Replace or Remove an SD Card 5

Note: There are times that you need to format the SD card. Format button should just be pressed and re-login to the camera.

top